Technical Data
| Cable family code |
IFAF
|
| Cable type |
FiTH Cable
|
| Cable version |
Gel-free installation cable
|
| Cable application |
indoor use
|
| CPR classification |
Dca-s1a,d0,a1
|
| DoP number |
D9087
|
| Fiber type |
G.657.A2
|
| Fiber count |
2
|
| Fiber color coding |
1.–4.: red, green, blue, yellow
|
| Loose tube count |
1
|
| Loose tube diameter |
1,15 mm
|
| Outer sheath material |
FRLSZH
|
| Outer sheath color |
yellow
|
| Cable outer diameter |
2,3 mm
|
| Cable weight |
5.5 kg/km / 4 lbs/1000ft
|
| DIN / VDE 0888 code |
J-B(ZN)H
|
| Warranty |
R&Mfreenet
|
| Expected lifetime |
min. 30 years
|
| CPR test method |
EN 50575, EN 13501-6
|
| Standard put-up length on drum |
2’100 m ± 5%
|
| CPR classification |
Dca
|
Mechanical Data
| Installation tensile strength |
200 N (5 min)
|
| Installation tensile strength acceptance criteria |
Δα ≤ 0,05 dB
|
| Installation tensile strength test method |
IEC 60794-1-21:E1
|
| Crush resistance long term |
400 N/100mm (15 min)
|
| Long-term crush resistance acceptance criteria |
Δα ≤ 0,05 dB prior release, no damage
|
| Long-term crush resistance test method |
IEC 60794-1-21:E3A
|
| Short-term crush resistance |
1000 N/100mm
|
| Short-term crush resistance acceptance criteria |
Δα ≤ 0,05 dB after release, no damage
|
| Short-term crush resistance test method |
IEC 60794-1-21:E3A
|
| Impact resistance |
3 Nm, 3 impacts, d=20 mm, R=12.5 mm
|
| Impact resistance acceptance criteria |
Δα ≤ 0,05 dB after test, no damage
|
| Impact resistance test method |
IEC 60794-1-21:E4
|
| Kink |
d=4 x cable diameter
|
| Kink acceptance criteria |
no kink
|
| Kink test method |
IEC 60794-1-21:E10
|
| Repeated bending |
R=20 x cable diameter, 25 cycles
|
| Repeated bending acceptance criteria |
no damage
|
| Repeated bending test method |
IEC 60794-1-21:E6
|
| Cable bend |
d=20 x cable diameter, 4 turns, 3 cycles
|
| Cable bend acceptance criteria |
Δα ≤ 0,05 dB after test, no damage
|
| Cable bend test method |
IEC 60794-1-21:E11A
|
| Minimum bend radius in service |
35 mm
|
| Minimum bend radius during installation |
45 mm
|
Environmental Characteristics
| Temperature cycling |
-10 °C +60 °C / +14 °F +140 °F
|
| Temperature cycling acceptance criteria |
Δα ≤ 0,05 dB
|
| Temperature cycling test method |
IEC 60794-1-22:F1
|
| Operation temperature |
-10 °C to +60 °C / +14 °F to +140 °F
|
| Storage / Transport temperature |
-10 °C to +60 °C / +14 °F to +140 °F
|
| Thermal load |
0.11 MJ/m
|
| Flammability vertical single cable |
Pass
|
| Flammability vertical single cable test method |
IEC 60332-1-2
|
| Smoke density |
Pass
|
| Smoke density test method |
IEC 61034-2
|
| Halogen free, acid gases |
Pass
|
| Halogen free, acid gases test method |
IEC 60754-2
|
| 2015 / 863 / EU - RoHS 3 |
conform
|
